Using AirLive POE-FSH2442G
Default Setting:
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Password: airlive
Configuration Steps:
1.
Open Internet Explorer 5.0 or above Web browser.
2.
Enter IP address http://192.168.10.1 (the factory default IP
address) to the address location.
3.
Login screen will appear right after.
4.
Enter the default password as "airlive".
5.
Click 'Login', and then configuration is ready to be set up.
Important Notice
1.
POE-FSH2442G is an end-span power sourcing equipment (power via 12,36 pin). Only port 1 to port 24 port
support PoE function.
2.
Total power consumption is Max. 196.5W; 802.3af power consumption is Max. 170W (port 1 to port 24 port).
3.
The maximum cabling distance is 100 meters.
4.
Always check the LED lights for troubleshooting.
POE-FSH2442G
Note
Using Internet Explorer 5.0 or above Web
browser is recommended.
Please make sure the manager PC must be
set on the same IP network.
For detailed information on Web
configuration, please refer to the user's
guide on the CD-ROM.
English
5