Power Recliner Troubleshooting; To Reduce The Risk Of Injury; Notes - La-Z-Boy Luxury-Lift Instrucciones De Operación

Luxur y-Lift
Troubleshooting:
WARNING

-- To reduce the risk of injury:

• Do not attempt to disassemble or ser vice the pump or motor. No
ser viceable parts are inside. Contact your La-Z-Boy
information.
Troubleshooting for Luxur y-Lift
The lift chairs are equipped with built-in amperage overload protection. This
feature prevents damage to the motors and electronics if there is an overload,
by stopping the operation of the motors.
If the amperage overload protector trips and shuts down the motors:
1. Release the UP or DOWN toggle switch. The system should reset automatically.
If the amperage overload protector trips repeatedly, check the following:
1. Make sure the cable tie, used to secure the lift base during shipping, has
been removed.
2. Make sure the operating capacity of 500 pounds has not been exceeded
and there is only one occupant in the chair.
3. Make sure there is nothing interfering with the movement of the chair.
If the lift recliner does not work, check the following:
1. Make sure the Power Transformer is plugged into an electrical outlet.
2. Make sure the electrical outlet is working. For example, make sure there
are no blown fuses or tripped circuit breakers.
3. Make sure all the connectors are secure; refer to the Assembly Instructions.
4. Make sure the electrical cords are not crimped or pinched. Make sure
the electric cord or plug is not damaged.
5. Make sure the operating capacity of 500 pounds has not been exceeded
and there is only one occupant in the chair.
If the amperage overload protection continues to trip, or if the lift recliner still
does not operate properly, contact your dealer for instructions on returning
the chair for examination and repair. Except for replacement of the Power
Transformer, never attempt to make any repairs or adjustments yourself.
Power Transformer Replacement
If the Power Transformer must be replaced:
1. Unplug the Power Transformer from the electrical outlet.
2. Locate the Power Transformer connection; refer to the Assembly Instructions.
Gently pull the connectors apart to disengage.
3. Push the replacement Power Transformer connector and the mating connector
tightly together; refer to the Assembly Instructions.
16
®
Power Recliner
® dealer for ser vice
® Power Recliners

Notes :

17