Batteries Installation; First Time Usage; Auto Channel Scan - Sveon SPremiere Serie Manual De Usuario

SPM820usermanual_SPM810 user guide 01/04/2014 8:01 Página 38
SPM820 - User Guide

7.1 Batteries installation

• Remove the lid, install the AAA batteries in its correct position (+/-) and close the lid.
• The following picture shows you how to install the batteries:
• Please point the remote control to the frontal panel of the device (where is located the IR receiver).
• The remote control coverage is 5 meters in an up to 60º of angle.

8. First time usage

The very first time you connect the device, the unit dis-
plays automatically the setup window:
• OSD language: Set the OSD language (language used
to display the different menus).
• Country: Set your country.
• Channel scan: Start the auto channel scan.

8.1 Auto channel scan

• Press "OK" button to start the auto channel scan.
• The option "Channel scan" deletes all the database and starts a channel scan in the selected country.
• The auto channel scan takes some minutes, please wait while the function is running.
• When the channel scan finishes, the channel list is saved automatically and the system displays the first found
channel of the list.
38
English
www.sveon.com