Technical Characteristics - MGE UPS Systems 420 Manual De Instalación Y Usuario

Technical characteristics

UPS power
Nominal input voltage
Input frequency
Voltage/frequency of battery backup outlets
9 in battery mode
Total output current for the 8 outlets
Output current of battery backup outlets 9
Leakage current
Input protection
Transfer time
Telephone surge protection
Sealed lead-acid battery
Automatic battery test
Average battery life
Operating temperature
Storage temperature
Operating relative humidity
Operating elevation
Safety standards
Electromagnetic compatibility standards
Warranty
Performances tested according to IEC 61643-1 (class 3) standard for 8/20 µs surge wave
AC input source protection
Uoc
Up
In
Imax
Dielectric isolation
AC Ground
AC / TEL
AC + Ground / Screw
Tel / Ground
Temporary overvoltage (TOV)
Uc
Ut
TOV
Load-side surge withstand capability
Uoc
Up
In
Energy dissipation
Protection
Center 420
420 VA / 250 W
230 V (184 V to 264 V adjustable range)
50/60 Hz (46 - 70 Hz working range)
230 V ± 7% (50/60 Hz ± 1 Hz) with pseudosinusoidal wave
1.8 A max
10 A resettable circuit breaker
Tel, ISDN, ADSL, Ethernet
12 V, 7 Ah
4 years typical, depending on number of discharge cycles and
IEC 60950-1, IEC 62040-1-1, CE certified
5 kV (Protection Center 420/500) / 6 kV (Protection Center 675)
1.7 kV (Protection Center 420/500) / 1.1 kV (Protection Center 675)
Protection
Center 500
500 VA / 300 W
10 A max
2.2 A max
0.06 mA
5 ms typical
12 V, 7 Ah
Once a week
temperature
0 to 35°C
-25°C to +55°C
0 to 85%
0 to 3000 m
IEC 62040-2
2 years
2.5 kA
8 kA
2500 Vac, 50 Hz
3000 Vac, 50 Hz
4000 Vac, 50 Hz
1000 Vac, 50 Hz
250 Vac
400 Vac
1450 Vac
6.6 kV
1.5 kV
2.5 kA
525 Joules
Protection
Center 675
675 VA / 400 W
2.9 A max
12 V, 9 Ah
3400745300/AC - 3