Use This Unit; Power On/Off; Make A Call; Receive Call - Blaupunkt BS 06 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100

5. Use this unit

5.1. Power On/Off

1. Press and hold the End / On-Off button to turn the unit on or off.
2. If you require a PIN code after power on, enter the correct PIN. If you enter the wrong
number, press the right soft key to delete the number.
3. To turn off the phone, press and hold the power key until the screen turns off

5.2. Make a call

When the network service provider name appears on the display, the phone is ready to
make and receive calls.
In Standby mode, press the number keys to enter the number you want to call, press the
right soft key to clear the wrong numbers, press the left soft key or the dial key to start the
call if the specified number is correct.
To enter an international phone number format, press twice the [*] key until [+]
international call sign appears on the display.

5.3. Receive call

When an incoming call is alerted to your device if your service provider supports the
number display, the display shows the caller's number or the caller's name (depending on
whether you have saved it in the phone book).
Press the dial key or the left soft key and answer [Answer] to the incoming call.

5.4. Emergency calls

You can immediately make an emergency call without a SIM card. Different networks can
use different emergency numbers, so please contact your network operator.

5.5. Reading new message

When you receive a message, a beep or vibration (as previously configured in the menu)
will alert you to this, or a graphic will appear on the display. Press the left soft key [View]
or OK to view the message, and the right soft key to return to the SMS menu to read other
incoming messages.

5.6. Camera

In Menu mode, select Camera to open the camera.
• Point the lens towards the object and adjust the image.
• Take the photo with the Middle (Navigation) key.
Attention! To save the images, you need a memory card.

5.7. SOS function settings

To set the SOS function, go to Menu> SOS Settings.
• SOS number: dial the numbers listed here by pressing the SOS button or sending an SMS
message to the numbers in the list. The alarm chain lasts until one of the numbers in
the list answers the call. Attention! Do not enter a number where call reception is
automatic.
• Set ongoing voice message: In this menu item you can record a short voice message and
5
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido