Device Description; Product Description; Initial Start-Up - Kärcher AFG 100 Manual De Instrucciones

ATTENTION
Indication of a potentially dan-
gerous situation that may lead to
damage to property.
transport
Where possible, always transport or return the device in
the original packaging. Please contact our Service De-
partment if the original packaging is not available.

Device description

For the figures, refer to the graphics page
3-stage filter cartridge
1
Pre-filter
2
Stand
3
Timer button
4
Fan button
5
Brightness button
6
Colour button
7
Control unit
8
Light ring
9
Service LED
10
On/Off button
11
Air quality button/Service button
12
"+" button
13
"-" button
14
Display
15

Product description

Whether in living spaces, at the workplace, in confer-
ence rooms or waiting rooms, the air in our rooms is
contaminated with dust and especially with fine dusts
that are harmful to health. We are also subjected to
heavy pollution from biological and chemical contami-
nants. This can be caused by construction deficiencies,
materials, paint, wood preservatives and so-called vola-
tile organic substances. We want to feel good and full of
energy. We want clean air without harmful contami-
nants, without VOC pollution, unpleasant odours, with
less chance of infection through bacteria and viruses,
less smell irritation and fewer allergens in children's
rooms.
The KÄRCHER AFG 100 reliably removes fine dusts,
allergens, bacteria, odours and VOC from your room air.
Lighting and colour selection
The colour and brightness of the LED ring can be ad-
justed as desired to provide a pleasing ambience.
10 colours and automatic colour changing can be se-
lected. The colours can be individually adjusted by the
user. The automatic colour change cycles gently
through all colours.
10 brightness levels are available.
3-stage filter cartridge (PP)
Die 3-stage filter cartridge consists of a catalyser filter,
an active carbon filter and an EPA filter. The filter mate-
rial is polypropylene (PP). The EPA filter E11 ensures
that fine dust, allergens, pollen and dust particles down
to a size of 0.3µm are filtered out of the air.
The patented plasma technology catalyses the air to
eliminate the smallest gaseous organic carbon com-
pounds, such as odour molecules, viruses, bacteria and
spores in an environmentally-friendly manner. Further
decomposition reactions occur in the 3-stage filter. The
plasma regenerates the 3-stage filter to provide a very
long service life for the 3-stage filter.
The VOC sensor is a special sensor that automatically
measures the degree of contamination in the air.
The fan can be adjusted over 5 levels or can also be op-
erated in the automatic mode "AU". The automatic
mode adjusts the fan level according to the degree of
contamination measured by the sensor.
From 1 - 99 hours can be selected. The device switches
off after the configured period of time. Ideal for air puri-
fication after leaving the home or office.
The pre-filter of filter class F7 removes all contaminants,
fine dusts and pollen larger than 3µm from the intake air
and protects the downstream filter. This ensures long-
term functionality. The filter material is polypropylene.
Service display and filter replacement
The service LED on the control unit lights up when ser-
vicing is required. The service LED flashes when the
pre-filter needs to be replaced.
Explanation of terms
VOC (Volatile Organic Compounds) are harmful va-
pours emitted by products surrounding us indoors in the
office or at home.
Examples of VOC sources are e.g. aerosol sprays,
cleaning agents, disinfectant, furniture, carpets, hobby
accessories such as varnish and glue, building materi-
als, paint, solvents, nail polish, pesticide and even air
fresheners.
Before the first use
 The device is thoroughly checked and carefully
packed before leaving the factory.
 Check the device immediately on receipt if the pack-
aging is damaged or opened.
 Never start up a damaged device. Contact your sup-
plier immediately in the case of potential complaint
or return of the device.
 Read and observe the technical data and all safety
instructions before starting up the device for the first
time.
1. Remove the air purifier, stand, fastening screw and
Allen key from the packaging.
2. Insert the fastening screw through the stand from
below.
Note
English
Plasma electrode
VOC sensor
Fan
Timer
Pre-filter

Initial start-up

Installation
15