Uline FENDALL 2000 Manual Del Usuario página 3

UNIT INSTALLATION CONTINUED
4. Keep unit
assembled and
hang it on the
mounted wall
bracket.
(See Figure 4)
5. Open side panels
by snapping
them out of
the front panel.
Remove front
panel by lifting
upwards and then
pulling forward.
(See Figure 5)
6. Discard the
shipping insert if
any. (See Figure 6)
CARTRIDGE INSTALLATION (S-19328)
1. Inspect label
and review
expiration date
to determine
if cartridge is
current and
ready for use.
(See Figure 7)
PAGE 3 OF 27
INSTALLATION CONTINUED
Figure 4
55 – 67"
Figure 5
2
1
Figure 6
3
Figure 7
NOTE: Label contains product information and
identifying lot number.
2. Hold cartridge
by side handles,
making sure
the nozzle and
tube are facing
downward and
the sticker on
the front face of
the cartridge is
facing out.
(See Figure 8)
NOTE: When lifting the cartridge, remember to
lift close to your body, keeping feet shoulder-
width apart. Bend your knees and keep your
back straight, lifting with your legs.
CAUTION! The cartridge weighs approximately
75 lbs. and may require assistance to lift.
3. Hang cartridge
on brackets.
(See Figure 9)
NOTE: Ensure
that the
hooks are
properly
seated and
the cartridge
is against the
wall panel.
4. Remove poly
bag protecting
the nozzle and
free the tube by
removing the
rubber band
(let the nozzle
hang in the basin
underneath
the cartridge).
(See Figure 10)
Figure 8
Figure 9
Figure 10
0621 IH-3838