Design TRAXON MOOD LIGHT Manual De Utilización & Garantía página 7

2) To Save a Color
To save your last color, press the MEMORY (M1) button on the remote control continuously until the Mood-Light 'object'
blinks once in acknowledgement of your command. The current color will be saved.
You can change a saved color with a new color, by pressing the MEMORY (M1) button again until the Mood-Light
'object' blinks once. This setting will be saved even during removal of power.
B) Sequence Modes
There are three pre-programmed, animated light sequences: Chill, Motion and Action.
1) Chill
Seductive, tranquil, relaxed - Chill is a light sequence to sooth your mind and calm your soul.
This Sequence can be displayed in four different color tones:
Press CHILL (S1) on the remote control to start the Chill Sequence in red color tones.
Press CHILL (S1) again to change to green color tones.
Press CHILL (S1) again to change to blue color tones.
Press CHILL (S1) again to white color tones.
To stop the Chill Sequence and start another mode - press any other button.
2) Motion
Interchanging waves crashing into psychedelic colors and effects – Motion is a light sequence to stimulate your senses.
Press MOTION (S2) on the remote control to start the Motion Sequence.
To stop the Motion Sequence and start another mode - press any other button.
3) Action
Fusion of techno and beat effects – Action is a light sequence of intense energy that will thrill your mind.
Press ACTION (S3) on the remote control to start the Action Sequence.
To stop the Action Sequence and start another mode - press any other button.
C) Function Modes
You can display six active light functions and control the speed of the functions.
1) Random
The Random Function is a display of unlimited and changing combinations of colors.
This function can use any random colors, or be limited to bright colors.
Press RANDOM (F1) on the remote control to start the Random Function with all the colors.
0 8