Instructions For Installation - LifeAir IonFlow 500C Manual

Do not use the air purifier outdoors.
Do not use the air purifier in damp rooms.
Do not use the air purifier in conjunction with coloured or oil-based candles, as
they emit soot which can become attached to walls and furniture.
You may experience a small electric discharge when touching the collector.
This is harmless!
You must arrange a ceiling fixture that withstands a minimum weight of 9 kg.
Before installation: Make sure no current exists on incoming wiring.
Connections must be carried out in accordance to wiring regulations.
Hazard: Electric shock.
Before maintenance: Make sure the air purifier is disconnected from the power
supply.
Warning: Never remove the hanger from ion generator under load!
1. Secure the steel bracket into the ceiling (Sketch 1 page 74)
2. Mount transformer onto the steel bracket (Sketch 2-4 page 74)
3. Connect power wiring to terminal block (Sketch 5-6 page 75)
4. Hang the YoYo onto hook of steel bracket (Sketch 7-8 page 75)
5. Mount canopy housing and turn to secure attachment to steel bracket
(Sketch 9-10 page 75)
6. Connect the hanger into the ion generator, snap-fit (click)
(Sketch 11-14 page 76)
Note: LifeAir cannot be held responsible for any damage caused as a result
of failure to follow the recommendations.

INSTRUCTIONS FOR INSTALLATION

ENGLISH
3