Installation - Eschenbach Prisma Manual Del Usuario

Installation

Plug the SCART connector into the
appropriate connection on your
Plug the output cable into the rear side
television set * and switch your
of the Prisma.
television on.
...connect the power cable with the
Plug the mains adaptor into the plug
output cable.
socket, and...
An image should now be displayed on
your television set. If there is no
image, press the following switch on
Prisma
your television control
"Video" or
Switch the Prisma on.
* If you do not have a SCART connection on your television set, then use the cinch video
cable and plug this into the yellow video connection (if available). If no connection is
available, ask your supplier for an RF modulator for your antenna connection.
- 11 -