AGPtek Hommie Manual De Instrucciones página 5

4 Connection of SATA drives
Now connect your internal hard disk or drives to the plug-in card. Check again
whether the data and power cables are correctly connected to your drives before
you close the PC housing again.
Next connect the power cable to your computer and start the operating system.
5 Installing the driver
If you are using the Windows 8.1 or Windows 8 operating systems, the driver will
install fully automatically. The PCIe card is ready to use after a few minutes.
If you wish to use the PCIe card with the Windows 7 operating system, please
proceed with installing the driver as follows.
Put the driver CD in your drive and close it. Find the driver in Computer and
double click to open.
You can start the driver installation by double clicking on the file named
"ASM1061".
Click on the "Next" button after the installation assistant has opened.
3