Before using your new wii compatible wireless charger,
please read this instruction manual to prevent any damage.
Put it away in a safe place for future referen
IMPORTANT
• Do not try to open the device, may cause damages and warranty will be
void.
• Do not expose to extreme temperatures.
• Clean with a soft, dry cloth.
• Do not use or store the equipment near wet places. May cause malfunction
or shock hazard.
• Keep batteries out of reach of children.
HIGHLIGHTS
The wii compatible wireless charger can charge the batteries of your
remote controls using induction technology; you just need to place the
remote control over the charger –even with silicon protector-.
The charger includes charge indicator light, 4 induction batteries
–compatible with wii remote controls- and USB power cable.
CONTROLS
Base:
Allow to place and
charge up to 4 controls.
Indicator LED:
The red LED will indicate that it is charging and turn
green when the remote has been fully charged.
INSTRUCTIONS
1. Remove the batteries from your control.
Insert one induction battery into the
batteries compartment of the control.
Mini USB input:
Allow to connect the USB
charging cable.
HOME
1
2
2. Insert the mini USB connector into the
USB port of the charger.
3. Insert the USB connectors into ports of your
videogame console.
4. Place your controls
vertically
under
the
signals of the charger.
The
red
LED
will
indicate that it is charging
and turn green when the
remote has been fully
charged.
Also you can charge the batteries without the control.
- Charges up to four controls with or without a silicone sleeve, if you use
consider that will increase the load time.
5. When the charge finished simply disconnect and place the charger on a
secure place.
SPECIFICATIONS
Base:
Input:
5V - - - (x USB)
NiMH batteries:
Output:
2.4V - - - 700mAh
Before using your new Electronic insect killer, please read this
Product design and specifications are subject to change
instruction manual to prevent any damage. Put it away in a
without previous notice.
Product: wii compatible wireless charger
Part number: VGA-225
Brand: Steren
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000
VGA-225
CONSOLE
WARRANTY