Descargar Imprimir esta página

BGS technic 8775 Manual De Instrucciones página 5

Rellenador neumático de aceite de caja de cambios

Publicidad

Idiomas disponibles

Idiomas disponibles

Pneumatic Gearbox Oil Filling and Suction Device
GENERAL INFORMATION
The pneumatic gearbox oil filler allows for the easy and professional filling of gearboxes and it is also
suitable for other non-corrosive liquids. The kit includes 13 gearbox oil filling adaptors for the following
car types:
1.
Ford (1/8" NPT)
2.
Universal Nozzle, for BMW, Honda, Nissan, etc.
3.
VW, Audi,Skoda
4.
VW, Audi, Porsche
5.
VW, Audi, Mini Cooper (M10x1.0)
6.
VW, Audi DSG (M24x1.5)
7.
VW, Audi CVT (M22x1.5)
8.
Mercedes-Benz 722.9 (M12x1.5)
9.
VW, Skoda (M18x1.5)
10. Audi, VW, Skoda (M30x1.5)
11. Universal, flexible 300 mm, for Honda,
Hyundai, Kia, etc.
12. Volvo (5/16-24" UNF)
13. Toyota, Lexus (M18x1.5)
TECHNICAL DATA
Pressure gauge for filling pressure monitoring
3 bar safety valve
Tank size: 8 l
Air consumption: 57 l/min
Air connection: 1/4"
SAFETY INFORMATION
-
Do not use the device for fuels or corrosive liquids such as, for instance, acids, etc. Non-
compliance may cause damages to the device, personal injuries and fire.
-
Do not carry out any modifications on the device. Modifications will void the warranty and can lead
to personal injuries and damages.
-
Observe the maximum pressure of 3 bar, the safety valve will protect against excessive pressure.
Immediately disconnect the compressed air supply from the device and do not put it back to use
without detection and repair of the failure, if the pressure in the tank climbs over 3 bar.
-
Only use the filling machine for the purpose as described under General Information.
-
Only use the device after having read the Operating Manual and the Safety Information provided.
-
Only use clean compressed air free of oil and water.
COMPRESSED AIR
The used compressed air is required to be clean and free of oil and water. Dirt particles, oil (from the
compressed air system) and water can penetrate through the filling machine and then enter into the
gearbox and cause damage beyond repair.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 8775
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading