Descargar Imprimir esta página

Westfalia 338076600001 Manual De Montaje página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
SIARR
35 - 24
PREPARATION
* Lower the exhaust pipe.
* Remove trimmings from the bottom of the boot as well as both sides.
ASSEMBLY
* On the inside of the boot on the top sheet metal, spot the existing
marks Rep. V and W (4 to the right and 4 to the left).
* Drill the holes with a diameter of 10,5mm at a right angle
and giving onto the inferior sheet metal of the spars.
* Widen only the holes of the superior sheet metal to a diameter of 17,5 mm.
* Offer the counter slabs to the points V and W and draw its outline, then
remove the sound insulating part as well as the two sheet metal pastilles.
* Position the counter slabs D and E with the nuts and bolts V and W.
* Offer the anchoring ring in the crosspiece F of the nuts and bolts X.
* Under the vehicle, assemble the arms B and C, without tightening,
to the points V and W with the nuts and bolts V and W.
* Attach the towing body to the points T and U with the nuts and bolts T and U.
FINISHING
* Tighten all the nuts and bolts to the torques indicated as follows,
the arms B and C to the spars then to the towing body.
* Attach the towing head with the nuts and bolts Y and Z and reassemble the elements removed here above.
FASTENING KIT
4 off HM10x100 screws
V
4 off CS10 washers
4 off HM10 nuts
4 off spacers dia.12/17 lg.66
4 off HM10x100 screws
W
4 off CS10 washers
4 off HM10 nuts
4 off spacers dia.12/17 lg.68
1 off HM12x40 screw
X
1 off HM12 nut
1 off CS12 washer
1 off spacers dia.25/12,5 lg.11,5 (F)
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
2 off HM12x35 screws
T
2 off CS12 washers
2 off HM12x35 screws
U
2 off CS12 washers
2 off HM12 nuts
2 off HM12x90 screws
Y
2 off HM12 nuts
2 off CS12 washers
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FICHIER : BUREAU\NOTICEDEMONTAGE\WESTFALIA\NOTICE\NDM3524-F - FOLIO NDMANG
Type
Type
Approval No.
Tow-bar for
HONDA CRV
e11*94/20*00*4117
5 doors
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
338076600001
Max. Total
Max. Total
Max. Verti-
cal load
Authori. Weight Towable Weight
1 960 kg
1 500 kg
Value
D
60 kg
8,33 kN

Publicidad

loading