Safety Instructions - Tetra LightWave Complete Set 270 Manual De Instrucciones

SAFETY INSTRUCTIONS

Prevention of electric shocks
• Only connect the power supply to a professionally installed plug socket.
• Only connect the power supply to the mains if the local supply voltage
corresponds to the specifications in the technical data.
• Protect the power supply and plug-in connectors from moisture.
• Never open the housing of the LED lighting or the power supply.
• Do not modify the LED lighting, the power supply or the connection cables.
• Check all components for damage before use. In case of damage, do not
switch on the equipment.
• The connection cables of the LED lighting and power supply are not
replaceable. If a connection cable is damaged, the LED lighting and/or
power supply must be replaced.
• In case of damage, immediately unplug the power supply from the mains.
Prevention of injuries and risks to people
• Do not allow children to play with the packaging materials. There is a risk of
choking.
• Rapidly changing brightness levels/strobe effects of the LED light can
trigger epileptic seizures. People with epilepsy should not be exposed to
these effects.
• Never look directly at the LED light source. Strong LED radiation can cause
eye injuries.
• Ensure the connection cables do not pose a trip hazard.
• Glass breakage results in a risk of cuts.
– Wear protective gloves when removing shards of glass.
Preventing material damage
• Do not bend or crush the connection cables.
• Only use the LED lighting with the power supply provided or a replacement
power supply from Tetra.
• Only use original spare parts and accessories.
UK
7