Pleasant Hearth OFW012SB Manual De Instrucciones página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly: Wrench (included), Phillips Screwdriver (not included)
ASSEMBLY INSTRUCTIONS
1. Insert handle (A) into hole in mesh wire cover
(B). Secure with M6 nut (BB) from underside of
mesh wire cover (B). Tighten with wrench (EE).
Hardware Used
BB M6 Nut
Wrench
EE
2. Attach ash catcher (E) to fire bowl (D) using
M5 x 10 mm bolt (CC) and M5 nut (DD). Tighten
with wrench (EE) and screwdriver (not included).
Hardware Used
M5 x 10 mm
CC
Bolt
DD M5 Nut
Wrench
EE
x 1
x 1
x 3
x 3
x 1
4
1
A
B
2
D
E
BB
CC
DD