Klarstein 10028784 Manual De Instrucciones página 15

15
Put the fat collecting
bowl (4) into the bracket
supplied for it in the base
of the appliance, buckle
the hole of fat collecting
bowl onto the screw to
fix it well (The flat col-
lecting bowl can be filled
with little water to make
it easier to clean).
Install the handle (1) to
the metal hood with the
screw (e) , gasket (d) and
hook (c).
Then place the hood on
the grill plate.
Push the detachable
temperature regulator
(14) as far as it will go
into the grill' s appliance
socket
.
Place the grill plate (3)
on the base of the ap-
pliance (5). First of all
insert the appliance
socket (15) into the
opening intended for
it (12), then set the grill
plate horizontally on
the appliance base.
Insert the thermometer
(18) into the hole of the
grill hood and then fix it
with the screw and nut
(N) into the back side of
the hood.
The metal hood (2) can
be opened and placed
on the side by being
hooked up on the edge
of grill plate