Publicidad
Idiomas disponibles
Idiomas disponibles
Legal Address of Manufacturer
United States
VWR International
Radnor Corporate Center
Building One, Suite 200
100 Matsonford Road, P.O. Box 6660
Radnor, PA 19087
800-932-5000
http://www.vwr.com
Country of origin - China
Intended use
This item is intended for general laboratory use to monitor time duration.
Product Specifications
Display:
Resolution:
Accuracy:
Power:
Size:
Accessories Supplied:
Getting Started
Before using this timer, open the battery compartment and remove the battery tab.
Operation
Setting the Clock:
1. Insert battery in battery compartment located on the back side of unit
2. To set clock, slide the CLOCK/TIMER switch to CLOCK.
3. Select 12 hour or 24-hour format
4. Slide SET/LOCK switch located on the back of unit to SET. Press HR, MIN, and SEC keys until
desired time is reached. Slide SET/LOCK switch to LOCK position.
Counting up
1. Place the unit in the clock mode by sliding the CLOCK/TIMER switch to CLOCK.
2. Press the START/STOP key once to begin counting up. Press the START/STOP key a second
time to pause the count (time-out). Press the START/STOP key again to resume counting. Any
number of time-outs may be taken. Press CLEAR while the count is paused to reset the unit to
00:00:00.
Europe
VWR International bvba
Researchpark Haasrode 2020
Geldenaaksebaan 464
B-3001 Leuven
+ 32 16 385011
http://be.vwr.com
LCD, 4-Digit 1"
1 second
± 0.01%
AAA battery
3¾ x 5½ X ½ inches
Wall-mount bracket, stand, battery, Traceable® Certificate, instructions.
VWR Collection Manual ver 1, rel 1 02.05.2017
Publicidad
