Meister i-drill pico 2.0 MAS 36ip2 Traducción De Las Instrucciones De Servicio Originales página 67

Destornillador con acumulador
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
MC-5450490-Bedien-0910_b 24.09.10 08:51 Seite 67
When using a charger designated for a
particular type of battery, there is a risk
of fire if it is used with other batteries.
b Only use the batteries designed for
use in the electric tools. The use of
other batteries may lead to injury and
risk of fire.
c When not in use, keep the battery
away from paper clips, coins, keys,
nails, screws or other small metallic
objects that may bridge the contacts.
A short-circuit between the battery
contacts can lead to burns or fire.
d Fluid can escape from the battery
when used incorrectly. Avoid all
contact with this. In the event of
accidental contact, rinse with water. If
liquid should get into the eyes, get
medical assistance. Battery fluid may
result in skin irritations and burns.
6 General safety information for
battery-powered screwdrivers
Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
7 Safety information for battery-
powered screwdrivers
a Hold the tool by the insulated
handle surfaces only when carrying
out tasks during which is it
possible that the tools will come
across hidden power cables or its
own cable. Contact with a power-
carrying cable can also put metal
parts of the unit under power and
cause an electric shock.
8 Safety notes for battery/charger
a Keep the charger away from rain or
damp. Water entering into the
charger will increase the risk of an
electrical shock.
b Only use chargers recommended
by the manufacturer to recharge
the battery. When using a charger
designated for a particular type of
battery, there is a risk of fire if it is
used with other batteries.
c Never use to recharge third-party
batteries. The charger is only
designed to charge the supplied
batteries using the voltages specified
in the Technical Data. Otherwise there
is a risk of fire or explosion.
d Keep the charger clean.
Contamination will increase the risk
of an electrical shock.
e Check the charger, cable and plug
each time you use the unit. Do not
use the charger if you find any
damages. Never open the charger up
yourself, have it repaired by a
qualified specialist only and with
original replacement parts. A
damaged charger, cable or plug will
increase the risk of an electrical shock.
f Never operate the charger on a
surface that will burn easily (for
example, paper, textiles etc) or in a
flammable environment. There is a
risk of fire occurring as a result of the
heat generated during the charging
process.
67

Publicidad

Tabla de contenido
loading

Tabla de contenido