Symbols; Device Description; Operation; Switching On/Off - Trumpf TruTool ID 1861 Manual Del Usuario

2.5

Symbols

The following symbols can be found in
these operating instructions and/or on
the described tool. They are important
for understanding and safe handling.
Read operator's manual/
instructions.
Warning of danger
Do not dispose of as household
waste.
On
Off
Screwing
Drilling
CE mark
ETL certification
Direct current
n Idle speed
o
Vibration emission value
a
(impact driving)
h
n Number of blows
s
M
max. tightening torque
max
1, 2, 3
2.6

Device description

The following numbering refers to the
device image on the graphics pages.
TruTool ID 1861 (1A5): Figure 1
1 Ventilation slots
Direction of rotation changeover switch
2
(left, right)
3 Handle, rubberized
18
4 Display impact level
5
Belt clip
6
Rechargeable battery
7 Release button for rechargeable battery
8 Charge indicator
9 Impact level selector button
10 Switch on/off
11 LED
12
Tool holder
13
Locking sleeve
3.

Operation

WARNING
Risk of injury from unintentional
actuation of the On/Off switch
» Remove the rechargeable battery from
the machine before carrying out any
work on the machine!
3.1

Switching on/off

Switching on
» See Figure 5
RPMs are infinitely adjustable depending
on the pressure on the On/Off switch.
Switching off
» See Figure 6
3.2 Changing the rechargeable
battery
The rechargeable battery can be used
immediately upon delivery and can be
charged at any time.
Removing the rechargeable battery
» See Figure 7
Inserting the rechargeable battery
» See Figure 8
3.3 Rechargeable battery charge
status display
When the On/Off switch is actuated,
the rechargeable battery charge status