Charging The Rechargeable Battery; Changing Tools; Adjustments; Changing The Direction Of Rotation - Trumpf TruTool ID 1861 Manual Del Usuario

display shows the rechargeable battery
charge level.
» See Figure 9
3.4 Charging the rechargeable
battery
Only use the rechargers recommended by
TRUMPF for charging the rechargeable
batteries.
Observe the information in
the operating instructions for
the recharger used.
3.5

Changing tools

WARNING
Risk of injury
» Check that the tool is seated correctly
by pulling the screw insert.
Attaching tool
» See Figure 10
Removing tool
» See Figure 11
4.

Adjustments

WARNING
Risk of injury
» Make adjustments only when the
machine is switched off!
4.1

Changing the direction of rotation

Clockwise
» See Figure 2
Counterclockwise
» See Figure 3
4.2

Setting the impact level

» See Figure 4
Pressing the impact level selector button
sets the corresponding level. There are
3 impact levels available.
There is a correlation between the speed
and the tightening torque stage. The
correct setting can be determined by
means of a test screw connection.
The time until the tightening torque is
reached varies depending on the screw
connection:
• Hard screw connection (in metal)
• Soft screw connection (in wood).
5.

Maintenance and service

WARNING
Risk of electric shock
» Before carrying out any maintenance
and care work on the machine (e.g.
changing tools, servicing) remove
the rechargeable battery from the
machine!
» Have all maintenance and repair work
that requires the motor housing to be
opened performed by an authorized
service center.
5.1

Cleaning

• Check the ventilation openings on the
power tool for dirt after use. Keep the
ventilation openings free and clean to
ensure proper cooling.
5.2

Customer service and repairs

Have service and repairs performed only
by the manufacturer or a service center.
The nearest service center can be found
at:
www.trumpf.com
Only use genuine TRUMPF spare parts
and accessories. You can obtain these
from your TRUMPF dealer.
en
19