Operation - Elite HG1600 Manual De Usuario

> Heat can reach ammable parts that are not visible to you.
> Do not use the product in the same position for a long time.
> Risk of Burns! Do not touch the hot nozzle. Wear protective gloves.
> Never point the hot air stream at people or animals.
> Never use the product as a hair dryer or to dry clothes.
> Do not put the nozzle too close to the part to be treated. Air buildup can cause the product to overheat.
> Do not block the air inlet openings.
> Let the product cool down completely before storing. The hot nozzle can cause damage and re.
> Symbols placed on tools should not be removed or covered. Information about the device that is no longer
readable should be replaced immediately.

Operation

WARNING
DANGER OF DEATH - Gas pipes are di cult to di erentiate from water pipes, do not point the heat gun at
the pipes without rst verifying what type of pipe it is.
WARNING
Health risk due to increased vapors - Wear a suitable respiratory mask and ensure that the work area is well
ventilated.
NOTE - Risk and damage - Excessive heat supply to the
Potential Applications
Paint and paint residue removal
- Heat the paint or paint residue from the surface to be worked with the hot air gun and remove it
with a suitable tool.
5
Keep Working