Tabla de contenido
Publicidad
Indicator lights (left or right)
Red (solid, shortly): BeoLab Receiver 1 is connected to
the mains, switching off or being reset.
Green (solid, shortly): BeoLab Receiver 1 switches on.
Green (flashing quickly): BeoLab Receiver 1 is ready to
be associated.
Orange (solid): The wireless signal strength is poor.
Reset of BeoLab Receiver 1
> Use a small pin, such as a straightened paper clip to
press and hold the RESET button for 1.5 seconds to
reset the wireless setting of BeoLab Receiver 1.
> The indicator light is solid red shortly, then it flashes
green quickly. BeoLab Receiver 1 is now ready to be
associated.
Publicidad
Tabla de contenido
