Initial Use; Inserting The Battery; Attaching The Gel Film; Usage - Beurer EM 25 Manual De Usuario

packing in a dry environment, ensuring it is not weighed
down by additional items.

3. Initial use

3.1 Inserting the battery

1. Open the battery compartment lid by
sliding the battery compartment lid
upwards [1].
2. Insert the 2 x 1.5 V AAA batteries. Make
sure that the batteries are inserted
correctly [2].
3. Carefully close the battery compartment
lid.

3.2 Attaching the gel film

1. Carefully remove the blue protective
film [3].
2. Carefully attach the gel film to the glute
toning device and detach the protective
film [4]. Ensure that the edge of the gel
film does not protrude over the glute
toning device. Gel film that has been
applied slightly askew will not affect the
function.
WARNING!
• Make sure that you attach the gel film to the device on
the side where the blue protective film was, otherwise
the skin could become irritated.
1

3.3 Usage

• Place the glute toning device on the part
of the body to be treated.
2
1. Press and hold down the
on/off button [A] for 1.5
seconds until the device
switches on. You will hear
a beep.
3
2. Use the +/- buttons to
increase [B] or reduce [C]
the intensity.
3. The automatic switch-off activates after 20 minutes
For optimal results we recommend a 4-week training plan.
4
Please note the following points:
1. 1-2 days rest each week.
2. Note down the highest intensity level reached after
each session and gradually increase this from time to
time.
3. Higher intensity levels can achieve better results, but
the stimulation should never be uncomfortable.
4. Ensure 20 minutes of stimulation for each use.
15
A
B C