Beurer JBY 86 Instrucciones Para El Uso página 16

Ocultar thumbs Ver también para JBY 86:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Display
1 Range control
2 Battery level
indicator
3 Channel indicator
4 Baby emotion:
Baby is asleep
5 Baby is awake
(different dis-
plays)
5. Start-up
Setting the pilot tone
Using the pilot tone changer in the battery
compartment, you can choose between a
total of 16 pilot tones. Ensure that the same
setting is selected for both the parent and
baby units, otherwise a connection cannot
be established.
Note
Change the pilot tone settings if there is
interference from other devices such as
baby monitors or radios.
1
2
3
You can choose to operate the units using
either the included rechargeable batteries, dis-
posable batteries or the power supply unit.
Rechargeable battery operation /
4
disposable battery operation
Pull the battery compartment lid off from
the bottom.
Insert the included rechargeable batteries
5
or 3 x 1.5 V type AAA batteries the correct
way round.
Close the battery compartment lid.
The power supply unit must be connected
in order to charge the batteries. The bat-
tery level indicator shows that the device
is charging. As soon as the batteries are
charged, the battery symbol appears
complete in the display.
The charging process lasts for approx. 10
hours when the device is switched off.
Note
Preparing the device for first use
Before the first use, the batteries should
be fully charged. The charging process
lasts for approx. 10 hours. The device
offers an operation period of approx.
16 / 22
hours after this.
16

Publicidad

Tabla de contenido
loading

Tabla de contenido