NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
3.
Place the fan housing next to a ceiling joist. The
fan housing should be level and perpendicular to
the joist.
4.
Mount the fan housing to the ceiling joist using the
wood screws (included) where indicated.
5.
Remove wiring box cover from fan housing with
Phillips screwdriver (not included).
6.
Pull the house wires through the wire box cover hole.
Using a quick connector, secure 120 V AC house wiring
from the wall switch to the fan as shown in the wiring
diagram on page 5. 14 AWG is the smallest conductor
that should be used for branch circuit wiring.
Carefully push the connected wires back into the wiring
box housing. Reattach the wiring box cover.
CAUTION: If the electrical wires do not match the
colors listed, you must determine what each house wire
represents before connecting. You may need to consult
an eletrical contractor to determine safely.
3
4
Ceiling joist
5
6
6
Quick
House
wires
connector
Product
wires