Important Battery Information; Product Specifications; Waste Electrical And Electronic Equipment - Gallagher S17 Manual De Instrucciones

Gallagher 3E1399 S17 S22 Portable Fence Energizer

IMPORTANT BATTERY INFORMATION

Recharging the battery
Storing the energizer
Maintenance free
battery
Battery replacement
Removing the battery
Disposing the energizer
Disposing the battery
Leaking battery

PRODUCT SPECIFICATIONS

Battery
Current draw
Stored energy
Output energy
Output voltage (no load)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product indicates that this product, packaging and with special care of the
battery must not be disposed of with other waste. Instead, it is your responsibility to dispose
of your waste equipment by handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling, please contact
your local city recycling office or the dealer from whom you purchased the product.
Switch the energizer off. Place in sunlight for 4 days with the
battery connected (RED +, Black -) OR charge the battery for 24
hours with a 6 V battery charger at less than 1 Amp. DO NOT
USE a 12V charger as this will damage the battery.
Switch the energizer off. Store in a well lit area so solar panel
keeps battery charged. Recharge battery before and after
storage.
The battery does not require maintenance.
Use only 6 V 7 Ah sealed, valve regulated (VRLA) batteries.
Switch the energizer off.
The battery must be removed from the energizer before the
energizer is disposed.
Lead acid batteries must be disposed of safely according to local
regulations.
Dispose of leaking battery and replace with 6 v 7 Ah sealed,
valve regulated (VRLA) battery.
S17
6 V 7 Ah sealed lead acid
(2M1246)
20 mA
0.17 J
0.11 J
7 kV
S22
6 V 7 Ah sealed lead acid
(2M1246)
30 mA
0.22 J
0.16 J
7.5 kV
Installation
9