Getting Started; Charging The Battery - MioWork A200 Serie Guia De Inicio Rapido

en

Getting started

Charging the battery

When charging the battery for the very first time, you should charge it for at least 8 hours (using the AC
charger) with your device turned off. To charge the battery, plug the home charger cable into the Mini-
USB port on the bottom of your device and the mains power charger into the power socket*.
The LED indicator will blink
indicator on the device lights up to indicate the battery charge status:
battery charging.
CAUTION! For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight). The battery
will stop charging when the ambient temperature is less than -10ºC (14ºF) or more than 60ºC
(140ºF).
• Recharge the battery when it is nearly discharged. When recharging, make sure that the battery
is fully charged. Doing so can extend the battery life.
• If the device has not been used for over a month or if you find the discharge/recharge time has
been shortened, be sure to fully discharge the battery first before recharging it. You are also
advised to fully discharge and recharge the battery once every 1~2 months.
• Failure to follow the battery usage instructions can cause damage to your device, battery and
even bodily injury or property damage and will void the warranty.
2
* The plug type varies with the region of your purchase.
Red while the battery power is less than 15%. During charging, the LED
Green – battery full; Red –