MioWork A200 Serie Guia De Inicio Rapido página 8

Using the Barcode Reader (for selected models only)
By using the Barcode Reader, your device will be able to read the information contained in the
barcode.
1. Tap > BCR Reader to launch the Barcode Reader
application on your device.
2. Position your device close to the barcode (approximately
5~10 cm), and point the barcode reader sensor to the barcode.
3. Tap the "Scan" button of the application to start scanning;
meanwhile, hold your device steadily to keep the barcode
within the sensor coverage until the information is displayed
on the screen.
4. The LED indicator blinks once to indicate the scanning status:
Green – successful scan.
Red – scan failed; please try again.
5. To configure the Barcode Reader, tap > BCR Settings.
en
7