IK iRig PRO Guía Rápida De Inicio página 8

IMPORTANT: the instrument input on iRig PRO will NOT
work if a cable with balanced (TRS or "stereo") ¼" plugs
is used.
Connecting MIDI keyboards or controllers
Connect the included 2.5-mm-to-MIDI cable to the iRig
PRO MIDI connector (8) and to the MIDI OUT port on your
keyboard or controller.
Open a Core MIDI compatible application on your iOS device
or on your Mac and set "iRig PRO" as the MIDI input device.
When iRig PRO is receiving MIDI messages the Phantom /
MIDI LED will turn blue.
Setting input gain on iRig PRO
When talking or singing into your microphone, or when
playing your instrument, check the iRig PRO Power / Audio
Level LED (2).
• If the LED is alternating between BLUE and GREEN, or is
always GREEN, you should increase the iRig PRO input
gain by rotating the GAIN control (3) clockwise.
• If the LED is sometimes flashes RED, you should decrease
the iRig PRO input gain by rotating the GAIN control (3)
counter-clockwise.
• When your gain setting is optimal, the LED should alternate
between GREEN and ORANGE while you play or sing.
Troubleshooting
I connected iRig PRO to my iOS device, but the device
doesn't recognize it, and none of my audio apps work
with it.
Remember to always connect the included 30-pin or
Lightning cable to the iRig PRO before connecting it to the
iOS device.
Sound is distorted.
You're probably overloading the input. Check that the input
gain on iRig PRO is set properly. If the Power / Audio Level
LED (2) is red when you play your instrument or sing or talk into
a mic, decrease the input gain (3) as described in this guide.
The iRig PRO Power / Audio Level LED is always dark
blue and I don't get any sound.
In order for iRig PRO to turn on, a Core Audio-compatible
audio app must first be launched on your iOS device or Mac.
• iOS: be sure you are using an app that works with audio
input from the 30-pin or Lightning dock connector.
• Mac: be sure you have set "iRig PRO" as the audio or MIDI
input device on the audio app you are using.
Phantom Power doesn't turn ON.
Check that you have inserted a working 9V battery in the
iRig PRO's battery compartment (5).
I can't get any sound from my condenser microphone.
Your microphone may need phantom power. Turn phantom