Publicidad
© 2011, Moog Videolarm, Inc. All Rights Reserved
S M 5
Compact Vandal-Resistant Surface Mount Dome-5"
Installation and Operation Instructions for the following models:
SM5C2N
Outdoor 5" IP Ready surface mount housing for a small PTZ camera, conduit
input from the side and the top of the housing. 24Vac input, with heater/blower.
Polycarbonate body and dome. IP66. 1" NPT threads for pedant mount - includes 1.5A
12Vdc camera power supply and wall transformer
SM5CF2
(Fixed camera version of the SM5C2N)
ISM5CN
(Indoor version of the SM5C2N without the heater/blower and 1.5A 12Vdc camera power
supply and wall transformer)
ISM5CF
(Indoor version of the SM5CF2 without the heater/blower and 1.5A 12Vdc camera
power supply and wall transformer)
SM5C24N (24Vac only version of the SM5C2N)
SM5CF24 (Fixed camera version of the SM5C24N)
Before attempting to connect or operate this product, please read these instructions completely.
www.videolarm.com
81-IN5431
01-31-2012
Publicidad
Tabla de contenido
Manuales relacionados para Moog Videolarm SM5
Resumen de contenidos para Moog Videolarm SM5
- Página 1 © 2011, Moog Videolarm, Inc. All Rights Reserved S M 5 Compact Vandal-Resistant Surface Mount Dome-5” www.videolarm.com Installation and Operation Instructions for the following models: SM5C2N Outdoor 5” IP Ready surface mount housing for a small PTZ camera, conduit input from the side and the top of the housing. 24Vac input, with heater/blower. Polycarbonate body and dome. IP66. 1” NPT threads for pedant mount - includes 1.5A 12Vdc camera power supply and wall transformer SM5CF2 (Fixed camera version of the SM5C2N) ISM5CN (Indoor version of the SM5C2N without the heater/blower and 1.5A 12Vdc camera power supply and wall transformer) ISM5CF (Indoor version of the SM5CF2 without the heater/blower and 1.5A 12Vdc camera power supply and wall transformer) SM5C24N (24Vac only version of the SM5C2N)
- Página 2 IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK).
- Página 3 If Purchaser believes that the Product is defective in material or workmanship, then written notice with an explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.
-
Página 4: Electrical Specifications
Electrical Specifications Contents of Box SM5C2N Power 24VAC Class 2 Only SM5CFN ISM5CN ISM5CF 24 VAC Accessories: Heater/ Blower: 40 Watts Camera Power: SEE CAMERA MANUAL Tools Required: Phillips Head Screwdriver ⅝” Allen Wrench English 24 VAC Accesorios: Calentador: 40 watts, Soplador: 40 Watts Energía De la Cámara fotográfica: SEE CAMERA MANUAL Las Herramientas Requirieron: Destornillador Principal Plano Del ⅝”... - Página 5 For Surface Mounting using side conduit entrance PACKETS (1) Mounting Plate (1) 1/4 x 20 Bolt (1) 1/4 Flat Washer (1) 1/4 Lock Washer (4) M3 6mm Bolt (4) M3 Lock Washers (7) 8 x 32 x 3/8" bolts (2) 8 x 32 Nuts (2) 94-FSCT01 Fixed Etch knockout slightly with utility knife.
- Página 6 For Surface Mounting using side conduit entrance For Surface mount applications Mount securely to ceiling or mounting Drill out (3) mounting holes as shown for # 10 hardware (not supplied) surface using the appropriate hardware • Taladre (3) los agujeros de montaje como se muestra •...
- Página 7 For Pendant or Wall mount applications For Pendant or Wall mount applications Seal pipe threads with teflon tape supplied Thread housing to optional pendent pipe or with outdoor housings wall mount bracket • Hilos de rosca de pipa del sello con la cinta del Teflon •...
- Página 8 For indoor ceiling application with electrical box Housing is designed to mount to 4 11 /16 x 4 11 /16” Drill out appropriate (2) mounting holes electrical box. Mount box securely to ceiling structure • Taladre (2) los agujeros de montaje apropiados •...
- Página 9 Axis M-10 Axis 207 Adding Camera hole Spacers pattern Attach Axis camera mount to camera base plate. Use (4) 1” spacers and attach camera base plate to housing. • Ate el montaje de cámara del eje al embase de la cámara. Utilice (4) los” espaciadores 1 y ate el embase de la cámara a la cubierta.
- Página 10 Axis 216 CAMERA ½" Use this hole pattern 2" Secure camera quick release Tighten hardware and Install (4) .5” + (4) 2.0” mounting plate with #8 hardware complete wiring spacers to center bosses provided • Instale (4) .5” + (4) 2.0” espaciadores para •...
- Página 11 AXIS 215 CAMERA ½" Use this hole pattern 1" Secure camera quick release Install (4) .5” + (4) 1.0” Tighten hardware and mounting plate with #8 spacers to center bosses complete wiring hardware provided • Pletina segura del lanzamiento rápido de la •...
- Página 12 Canon VC-C50iR CAMERA Use this hole 1" pattern 1" Secure camera quick release Install (4) .5” + (4) 1.0” Tighten hardware and mounting plate with #8 spacers to center bosses complete wiring hardware provided • Pletina segura del lanzamiento rápido de la •...
- Página 13 Acti ACM 8201/ ACM 8211 CAMERA Use this hole 1" pattern Secure camera quick release Install (4) 1” spacer to Tighten hardware and mounting plate with #8 hardware center bosses complete wiring provided • Pletina segura del lanzamiento rápido de la cámara •...
-
Página 14: Hardware Provided
Panasonic BB-HCM381 / BBHCM580 / KX-HCM280A CAMERA Use this hole ½" pattern Secure camera quick release Install (4) ½” spacers to Tighten hardware and mounting plate with #8 center bosses complete wiring hardware provided • Instale (4) espaciadores del ½ los” para •... - Página 15 Panasonic WV-NF284 - WV-NF302 CAMERA 1" Secure camera quick release Install (4) 1” spacer to Secure camera safety screw mounting plate with #8 center bosses hardware provided • Pletina segura del lanzamiento rápido de la • Instale (4) 1” espaciador para centrar los •...
- Página 16 Toshiba IKWB21A CAMERA ½" Secure camera quick release Tighten hardware and Install (4) ½” spacers to mounting plate with #8 hardware complete wiring center bosses provided • Pletina segura del lanzamiento rápido de la cámara • Instale (4) espaciadores del ½ los” para •...
- Página 17 ELMO 401 CAMERA ½" 2" Secure camera quick release Install (4) .5” + (4) 1.0” Tighten hardware and mounting plate with #8 hardware spacers to center bosses complete wiring provided • Instale (4) .5” + (4) 1.0” espaciadores para • Apriete el hardware y termine el cableado •...
- Página 18 Wire Gauge Total vA consumed 1300 36.5 54.9 91.4 1440 27.1 43.0 68.6 19.8 27.4 39.6 68.6 13.4 21.3 34.1 54.6 86.9 10.6 17.1 27.4 43.6 69.5 14.3 22.9 36.2 57.9 91.7 12.2 19.5 31.1 49.7 78.6 24 VAC OUTPUT FOR CAMERA 10.3 16.8...
- Página 19 12VDC Power Connector Locate 12VDC Power Connector Connect power and control wires to camera • Disposición del modelo con la fuente de alimentación • Conecte la energía y controle los alambres a la 12VDC cámara • Disposition de modèle avec l'alimentation de l'énergie •...
-
Página 20: Replacement Parts List
Secure Dome Assembly to housing Clean dome with MILD soap and water ONLY • Asegure la asamblea de la bóveda a la cubierta • Limpie la bóveda con el jabón y agua SUAVES SOLA- MENTE • Fixez l'Assemblée de dôme au logement •... -
Página 21: Product Registration/Warranty
Product Registration/Warranty Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest quality products available and superior customer service. Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators. Register Your Products Online Take a few moments and validate your purchase via the Online Product Registration Form at www.videolarm.com/productregistration.jsp Register your recent Moog Videolarm purchases and benefit from the following: • Simple and Trouble-Free RMA process • Added into customer database to receive product updates / news • Eliminate the need to archive original purchase documents: Receipts, Purchase Orders, etc…...