Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
IMPORTANT:
- DO NOT immerse the humidi er in the water when cleaning.
- NO water should come into the contact with the air vents.
- DO NOT place any parts in a dishwasher.
DAILY CLEANING
It is important to perform daily cleanings as this prolongs the life of the
humidi er and protects it from the buildup of mineral deposits and bacteria.
1. Turn o the humidi er and unplug the unit from its electrical
outlet before cleaning.
2. Empty water from the water tank and base daily.
3. Wipe clean and dry the base of humidi er with soft cloth.
4. Pour water inside the water tank and place it back.
WEEKLY CLEANING
It is important to perform weekly cleaning as
this prolongs the life of the humidi er and
protects it from the buildup of mineral
deposits and bacteria.
1. Turn o the humidi er and unplug the unit
from its electrical outlet before cleaning.
2. Empty water from the water tank and base daily.
3. Fill half of the water tank with warm water. Add
2 tablespoons of white vinegar to the tank.
Replace the water tank cap.
4. Shake the water tank to loosen possible buildup.
5. Place the water tank back on the base. Let it sit
for about 25 minutes. Some of the vinegar water
will drain into the reservoir, covering the ultrasonic
transducer membrane.
6. After about 25 minutes, remove the tank cap
and empty the water from the tank and base.
2 TBSP VINEGAR
11
CLEANING AND MAINTENANCE - SPECIFICATIONS
7. Clean the ultrasonic transducer
membrane with the included
brush only.
8. Wipe clean and dry the base
of humidi er with soft cloth.
9. Pour water inside the water
tank and place it back.
END OF SEASON CLEANING AND STORING
1. Turn o the humidi er and unplug the unit from its electrical outlet
before cleaning.
2. Empty water from the water tank and base daily.
3. Perform the WEEKLY CLEANING using white vinegar/water solution.
Refer to previous page.
4. Empty the water from the tank and base.
5. Make sure to air dry the water tank. Do not place the tank cap unless
it is completely dry.
6. Make sure all humidi er parts are completely dry prior to storage.
7. Store the humidi er in a cool, dry place.
Electrical Voltage
110~220VAC
Power Consumption
24VDC 18.5W
Humidi er Type
Ultrasonic Cool Mist
Cleaning Brush
Ultrasonic Transducer
Membrane
12
Publicidad
Tabla de contenido
