Important Safety Instructions - Ryobi Tek4 RP4000 Manual De Utilización

gB
FR DE ES

IMPORTAnT SAFETY InSTRUCTIOnS

CAUTIOn
Use of pro-cedures other than those specified
herein may result in hazardous radiation exposure.
The laser guide radiation used in the plumb/cross laser
■
attachment is Class II with <1mW and 630-670nm
wavelengths.
Avoid direct eye exposure when using the laser and
■
do not project the laser beam directly into the eyes of
others. Serious eye injury could result.
Do not remove or deface any prod uct labels. Removing
■
product labels increases the risk of exposure to laser
radiation.
Do not place the instrument in a position that may cause
■
IT nL PT DK SE FI nO RU PL CZ HU
English
anyone to stare into the laser beam intentionally or
unintentionally. Serious eye injury could result.
Do not operate the plumb/cross laser around children
■
or allow children to operate the tool. Serious eye injury
could result.
Always turn the plumb/cross laser off when not in use.
■
Leaving the tool on increases the risk of someone
inadvertently staring into the laser beam.
Do not operate the instrument in com bustible areas
■
such as in the presence of flammable liquids, gasses, or
dust.
Always ensure the laser beam is aimed at a surface
■
with-out reflective proper ties. Shiny reflective materials
are not suitable for laser use.
The laser shall be used and maintained in accordance
■
with the manufacturer's instructions.
1
RO LV LT EE HR SI SK gR TR