FLIR Systems i5 Manual Del Usuario página 29

English
Legal disclaimer
All products manufactured by FLIR Systems are warranted
against defective materials and workmanship for a period of
one (1) year from the delivery date of the original purchase,
provided such products have been under normal storage,
use and service, and in accordance with FLIR Systems in-
struction.
All products not manufactured by FLIR Systems included in
systems delivered by FLIR Systems to the original purchaser
carry the warranty, if any, of the particular supplier only and
FLIR Systems has no responsibility whatsoever for such
products.
The warranty extends only to the original purchaser and is
not transferable. It is not applicable to any product which
has been subjected to misuse, neglect, accident or abnormal
conditions of operation. Expendable parts are excluded
from the warranty.
In the case of a defect in a product covered by this warranty
the product must not be further used in order to prevent ad-
ditional damage. The purchaser shall promptly report any
defect to FLIR Systems or this warranty will not apply.
FLIR Systems will, at its option, repair or replace any such de-
fective product free of charge if, upon inspection, it proves
to be defective in material or workmanship and provided
that it is returned to FLIR Systems within the said one-year
period. FLIR Systems has no other obligation or liability for
defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems spe-
cifically disclaims the implied warranties of merchantability
and fitness for a particular purpose.
FLIR Systems shall not be liable for any direct, indirect, spe-
cial, incidental or consequential loss or damage, whether
based on contract, tort or any other legal theory.
Copyright
© FLIR Systems, 2008. All rights reserved worldwide. No parts
of the software including source code may be reproduced,
transmitted, transcribed or translated into any language or
computer language in any form or by any means, electronic,
magnetic, optical, manual or otherwise, without the prior
written permission of FLIR Systems.
This manual must not, in whole or part, be copied, photo-
copied, reproduced, translated or transmitted to any elec-
tronic medium or machine readable form without prior con-
sent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are ei-
ther registered trademarks or trademarks of FLIR Systems
and/or its subsidiaries.
All other trademarks, trade names or company names refer-
enced herein are used for identification only and are the
property of their respective owners.
Quality assurance
The Quality Management System under which these prod-
ucts are developed and manufactured has been certified in
accordance with the ISO 9001 standard.
FLIR Systems is committed to a policy of continuous devel-
opment; therefore we reserve the right to make changes and
improvements on any of the products described in this man-
ual without prior notice.
Patents
This product is protected by patents, design patents, patents
pending, or design patents pending:
7,157,705; 12/114865
Warnings
This equipment generates, uses, and can radiate radio fre-
quency energy and if not installed and used in accordance
with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to
Subpart J of Part 15 of FCC Rules, which are designed to pro-
vide reasonable protection against such interference when
operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference
in which case the user at his own expense will be required to
take whatever measures may be required to correct the in-
terference.
Do not disassemble or do a modification to the battery. The
battery contains safety and protection devices which, if they
become damaged, can cause the battery to become hot, or
cause an explosion or an ignition.
If there is a leak from the battery and the fluid gets into your
eyes, do not rub your eyes. Flush well with water and imme-
diately get medical care. The battery fluid can cause injury to
your eyes if you do not do this.
Do not continue to charge the battery if it does not become
charged in the specified charging time. If you continue to
charge the battery, it can become hot and cause an explo-
sion or ignition.
Only use the correct equipment to discharge the battery. If
you do not use the correct equipment, you can decrease the
performance or the life cycle of the battery. If you do not use
the correct equipment, an incorrect flow of current to the
battery can occur. This can cause the battery to become hot,
or cause an explosion and injury to persons.
Make sure that you read all applicable MSDS (Material Safety
Data Sheets) and warning labels on containers before you
use a liquid: the liquids can be dangerous.
Cautions
Do not point the infrared camera (with or without the lens
cover) at intensive energy sources, for example devices that
emit laser radiation, or the sun. This can have an unwanted
effect on the accuracy of the camera. It can also cause dam-
age to the detector in the camera.
Do not use the camera in a temperature higher than +50°C
(+122°F), unless specified otherwise in the technical data
section. High temperatures can cause damage to the cam-
era.
Do not attach the batteries directly to a car's cigarette lighter
socket.
Do not connect the positive terminal and the negative ter-
minal of the battery to each other with a metal object (such
as wire).
Do not get water or salt water on the battery, or permit the
battery to get wet.
Do not make holes in the battery with objects. Do not hit the
battery with a hammer. Do not step on the battery, or apply
strong impacts or shocks to it.
en-US