Multi-Language Quick Installation Guide; English - ECS A55F2-M4 Manual Del Usuario

Hardware
Ins Steps
Step 1. Ins of the CPU and CPU Cooler:
Step 2. of Memory Modules:
2-1. Unfasten the latches on each side
of the DIMM slots.
Step 3. Ins of Motherboard:
3-1. Replace the back I/O plate of the
case with the I/O shield provided in
motherboard's package.
Step 4. of an Expansion card:
Remove the metal located on the slot and then insert the expansion card into the
slot. Press the card rmly to make sure it is fully inserted into its slot. And then
return the screw back to its
Guide
1-2. Apply thermal grease on top of the
CPU. Put the CPU Fan down on the
module and ip the levers
over the heat sink in place.
2-2. Firmly press the DIMM down un l it
seats correctly. Make sure the slot
latches are levered upwards and latch
on the edge of the DIMM.
3-2. Place the motherboard within the
case by
Secure the motherboard to the case
with screws.
.
it into the I/O plate.
7