Stanley POWERMAX RT901 Manual Del Usuario página 2

INSTRUCTIONS
1. Connect the power strip to a 120V grounded outlet.
2. Plug your electrical devices into one of the power strip's outlets.
a) Plug devices that need to
be always powered into
the ALWAYS ON outlets.
3. On the remote, push the top portion of the
rocker switch (nearest to the LED to turn the
devices on or the bottom portion to turn the
devices off.
4. The remote can be mounted on a wall with two
screws or double-faced tape (included). The
remote slides out for portable convenience.
Please note that the POWERMAX
a surge protector.
* This item is a Radio
Frequency device
(RF), and as such
the range of the
remote control is
dependent on many
factors. Actual
operational distance
will vary based on
walls and line of
sight obstructions,
and other nearby
electronic devices.
b) Plug devices that you wish to
operate by remote control into
the REMOTE outlets. Make
certain that your electrical
devices are powered on.
REMOTE is not
™