Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation Instructions for
Wembley Park 2 Light Outdoor Flush Mount
Outdoor
G
ENERAL RODUCT NFORMATION
P
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
1
Place the fixture base and washer over the threaded nipple, then secure them in place by fastening the coupler.
2
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
3
Screw the threaded pipe onto the coupler, then place the spacer over the threaded pipe and secure it in place by
4
tightening the nut.
Place the diffuser over the threaded pipe and secure it in place by tightening the finial.
1 5
I
:
2
3
COUPLER
THREADED PIPE
SPACER
DIFFUSOR
5
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
WASHER
4
NUT
FINIAL
1
CAUTION - RISK OF FIRE
MOUNTING PLATE
THREADED NIPPLE
FIXTURE BASE
LAMP
OL9513
OL9513
1.1
1

Publicidad

loading

Resumen de contenidos para Feiss OL9513

  • Página 1 Installation Instructions for OL9513 Wembley Park 2 Light Outdoor Flush Mount OL9513 Outdoor ENERAL RODUCT NFORMATION These fixtures are intended to be installed utilizing NEC compliant CAUTION - RISK OF FIRE junction boxes. This product must be installed in accordance with the applicable installation code by a person familiar This product is safety listed for damp locations.
  • Página 2 ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. PLAQUE DE MONTAGE ATTACHE FILETE BASE DE LUMINAIRE AMPOULE...
  • Página 3 PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. PLACA DE MONTAJE CONECTADOR ROSCADO BASE DE LA LÁMPARA BOMBILLA...
  • Página 4 SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.969.3347 www.Feiss.com © 2015 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification. A Generation Brands Company...