Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DN
15
Connection (Rp)
½"
Kvs
20 m³/h
A
62 mm
C
104 mm
Weight
0.6 kg
45.3
109
20
25
32
¾"
1"
1 ¼"
45 m³/h
60 m³/h
100 m³/h
68 mm
81 mm
86 mm
107 mm
112 mm
117 mm
0.7 kg
0.9 kg
1.1 kg
58
A
Flow direction
1 Installation
WARNING! Electric shock!
Before carrying out works, disconnect the actuator from the
power supply!
1.1 Mounting
The actuator can only be mounted to the valve in one way.
Î Attach the actuator to the valve by means of the fastening clip.
1
The installation of the valve must be carried out in accordance with the approved
technical regulations. Ensure excess sealing material, tape, etc. does not enter the
valve body. In order to avoid blocking of the valve cone, pay attention to the fol-
lowing advice and avoid all soldering, or welding processes close to the valve.
Note
In order to attain the maximum operating safety and reliability, it is rec-
ommended to flush the system and to insert an appropriate dirt trap
(0.65 µm) in front of each valve (see installation scheme).
1 - Ball valves
2 - Dirt trap ~ 0.65µm
2
3
3 - Motor-driven 2-port ball valve
15
Publicidad
Capítulos
Tabla de contenido
