Better Homes and Gardens Bryant BH17-021-399-07 Manual Del Usuario página 4

C
5/16" x 2-1/2" Bolt
(4 used in this step)
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Position the Table Top (A) upside down on a level and protective surface.
3. Attach 2 Legs (C) to the Table Top (A) by inserting the 2-1/2" Bolts (1) with the Lock Washers (2) and
Flat Washers (3) through the drilled holes on the corner blocks and securely screw into the threaded
inserts on the Legs.
Assembly Instructions
3
2
A
1
A
①
(4 used in this step)
4
C
Lock Washer
②
C
Flat Washer
(4 used in this step)
③