Publicidad
Idiomas disponibles
Idiomas disponibles
15. The opening and closing movements make it possible
to check the mouth and see whether the registration pin
snaps into the hole of the Plexiglas plate.
16. If this is the case, the position is cemented using regis-
tration silicone or impression plaster.
17. If this is not the case, the registration procedure must
be repeated.
40
Notes on cleaning
What
When
Registration
After each
parts and
use
screws (metal)
Plexiglas plate
After each
(acrylic)
use
With what
Sterilization in the auto-
clave at 134° C for 5:30
minutes, perform pre-
EN
vacuum method. Please
observe the applicable
standards.
Perform disinfection in the
immersion bath according
to the instructions of the
disinfectant manufacturer.
41
Publicidad
