Mounting On A Table - LG 43UH610T Guía Rápida De Configuración

Using the Button
(Depending upon model)
You can simply operate the TV functions, pressing
or moving the button.
NOTE
• 43/49UH6110, 43/49UH6100, 43/49UH610T,
and 49UH6000 does not have a Joystick button
but has only a power On/Off button.
Dome Button
Or
Basic Functions
1 All running apps will close and any recording in
progress will stop.
Adjusting the Menu
When the TV is turned on, press
You can adjust the Menu items pressing or moving
the buttons.
Turns the power off.
Accesses the setting menu.
Clears on-screen displays and returns to TV
viewing.
Changes the input source.
8
Button
Joystick Button
Or
Power On (Press)
Power Off (Press and Hold)
Volume Control
Channels Control
button one time.

Mounting on a Table

1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
1 0 c m
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Securing the TV to a Wall
(optional)
(Depending upon model)
1
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.
10 cm
1 0 c m
m
1 0 c