Mounting On A Table - LG 43UV340C El Manual Del Propietario

Adjusting the Menu
When the TV is turned on, press the
time. You can adjust the Menu items using the
buttons.
Turns the power off.
Changes the input source.
Scrolls through the saved channels.
Adjusts the volume level.

Mounting on a Table

(Depending upon model)
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
1 0 c m
1 0 c m
2 Connect the power cord to a wall outlet.
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
• Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
6
button one
1 0 cm
(4 in c h e s )
1 0 c m
1 0 c m
Adjusting the Angle of the TV to Suit
View
(Depending upon model)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
• When adjusting the angle of the TV, watch
out for your fingers.
- Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
Attaching the TV to a desk (optional)
(Depending upon model)
If mounting the TV on a table, make sure it is
installed according to the method outlined in
'Attaching the TV to a desk' .
The TV should be attached to a desk so it cannot
be pulled in a forward/backward direction,
potentially causing injury or damaging the
product.
[TYPE 1]
4-Screws
(Not provided as parts of the product.)
Stand
• Screw: M5 x L (*L: Table depth + 8~10 mm) ex)
Table depth: 15 mm, Screw: M5 x L25
20˚
Desk