ASROCK B560M Pro4/ac+ Manual Del Usuario página 27

Serial ATA3 Connectors
Vertical:
(SATA3_0:
see p.1, No. 17)
(SATA3_1:
see p.1, No. 16)
Right Angle:
(SATA3_2:
see p.1, No. 11)(Upper)
(SATA3_3:
see p.1, No. 12)(Lower)
(SATA3_4:
see p.1, No. 14)(Upper)
(SATA3_5:
see p.1, No. 13)(Lower)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 20)
(9-pin USB5_6)
(see p.1, No. 19)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 9)
Front Panel Type C USB
3.2 Gen1 Header
(20-pin F_USB3_TC_1)
(see p.1, No. 10)
SATA3_0 SATA3_1
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+
Dummy
1
USB Type-C Cable
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
*If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_1 will be disabled.
There are two USB
2.0 headers on this
motherboard.Each USB
2.0 header can support
two ports.
There is one USB 3.2
Gen1 header on this
motherboard. This USB
3.2 Gen1 header can
support two ports.
There is one Front
Panel Type C USB 3.2
Gen1 Header on this
motherboard. This header
is used for connecting a
USB 3.2 Gen1 module for
additional USB 3.2 Gen1
ports.
B560M Pro4/ac+
23