Bracket Installation - Yamaha CS-700 Guia De Inicio Rapido

English

1. Bracket installation

Install the bracket with 4 appropriate screws on the wall, spacing two pair of screws as far apart as possible.
Ensure that the bracket is tight to the wall or the spacers to avoid vibration. If installed below the display ensure
that the distance is big enough to fit the CS-700 unit. You can adjust the depth of the installation by using the
appropriate number of spacers (0-2) on each side. Maximum mounting height is 2m / 6' 8" from the floor. Always
use 4 screws.
≥ 3 ¾ in / 95 mm
0x, 1x, 2x
2. Placing the CS-700 unit on the bracket
Position the CS-700 in such a way that the two hooks in the front of the bracket fit into the cavities on the lower
part of the
CS-700. Ensure that the CS-700 is safely held by the hooks.
5