Time And Date Setting - Steren HER-400 Manual Del Usuario

PREPARATION OF MEASUREMENT
1. Use a screwdriver in order to remove the cover from the
battery compartment.
2. Insert 6 AAA batteries. Make sure to respect the polarity of
the batteries as signaled in the battery compartment.
3. When the batteries' power level is below the minimum
operating level, a icon will appear on the LCD screen and
- +
will begin to blink. This indicates that the batteries must be
replaced.
4. If you wish to use a power adaptor in order to power the
device instead of batteries (power adaptor not included with the
device), connect it to the corresponding jack (DC9V).

TIME AND DATE SETTING

1. With the decibel-meter powered off, press the MAX button.
2. Without releasing the MAX button, power the device on.
3. The LCD screen will display the current time, and the seconds
blinks in the screen.
4. Use the LEVEL ▼ ▲ buttons in order to increase or reduce
the parameter.
5. Press the MAX button once again to set the minutes.
6. To adjust the hour, press the MAX button once. The
parameter blinks. Use ▼ ▲ buttons in order to make the
needed changes.
7. Press the MAX button again in order to adjust the date. Use
the ▼ ▲ buttons to change the parameters, then press MAX
button to confi rm the selection. (Date format is: Year, Month,
Day)
8. Once you have fi nished making the adjustments, power the
device off. The changes will now be saved in the memory.
ENGLISH-6