Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Maximum Button
5
Press this button in order to select if you want to view the
maximum data in the measurement
6. A/C
6
Press the A/C button in order to change between general
measurement and measurement in an acoustic environment.
7. Measuring Time
7
For real-time measurement, select FAST. For general
measurements, select SLOW.
8. Levels
8
Allows you to select the measurement range. You can select
between 30-80, 40-90, 50-100, 60-110, 70-120, 80-130, and
30-130
9. Illumination
9
Press this button once in order to illuminate the screen's
backlight
11 Calibration
10
Use this control in order to make adjustments to the
decibel-meter. In order to make these adjustments, refers to a
Steren authorized technician.
11
1 AC Adaptor
Allows you to connect a 9V power adaptor to the device (adaptor
not included with the device)
12
1 DC Output
10 mV / dB DC, 100 ohms impedance
13
1 AC Output
0.707 AC rms at complete range for each channel, 600 ohms
impedance
1 Battery Compartment
14
ENGLISH-3
Publicidad
Tabla de contenido
