Connecting Drain Hose; Before Connecting - LG WT21VSS6 Manual Del Proprietário

Connecting Drain Hose

Before connecting Drain Hose, check your Drain Hose model and choose the correct instructions.
Pump Model
Firmly insert the free end of the drain hose into the drain opening of your
home. Make sure the soft rubber end is completely inside the drain opening.
• If the water valves and drain are built into the wall, fasten the drain hose to one of the water hoses
with the cable tie (ribbed side on inside).
• If your drain is a standpipe, fasten the drain hose to the standpipe with the cable tie provided.
Cable Tie
Note
Non-Pump Model
1

Before connecting

Ensure that the hose clip is set as indicated here.
2
Connect the Elbow Hose
Push the elbow hose toward the body of the
washing machine.
3
Place the Drain Hose
To change the direction of the hose, pull out the
elbow hose and change the direction.
Repeat Step 2.
Cable Tie
Clip
35