Important - Gladiator GAWB66HWGG Manual De Instrucciones

3.
Align angle brace holes
Align the holes in the angle braces with the holes in the
workbench top and the holes in the legs.
IMPORTANT: The angle braces are left-hand side and right-
hand side specific. If the hole pattern doesn't match on one
side, try the other side.
5.
Fasten angle braces to legs
Using three Allen head bolts per brace, fasten the angle
braces to the legs.
4.
Fasten angle braces to workbench
Using two lag screws per brace, fasten the angle braces to the
underside of the workbench top. Do not completely tighten the
screws.
6.
Tighten screws and bolts
Completely tighten all screws and bolts.
5