Beta 1462/KMRC Instrucciones página 5

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
Brand
MB
Chrysler
OPERATING THE EXTRACTOR ON ENGINES WITH 4 AND 5 CYLINDERS
• Use the socket to disassemble the electrical connection (fig. 1).
• Use the key to remove the ring nut inside the injector (fig. 2).
• Insert the screw into the injector (im. 3).
• Place the extractor body on the cylinder head and tighten the nut on the screw (im. 4),
until the complete removal of the injector.
1
OPERATING THE EXTRACTOR ON ENGINES WITH 6 CYLINDER "V SHAPE"
• Disconnect electrical connections from the injector (im. A) and unscrew the two screws securing the injector to the cylinder head.
• Insert the screw (311 110 001) on the thread of the injector (im. B) and insert the extactor supporting foot.
• Place the extractor body on the cylinder head, screwing the nut on the screw until
the complete removal of the injector (Fig. C).
A
APPLICATION
Model
Vito, CLK, Sprinter, Viano, Vario
Classe M, GL, C, GLK, E, CLS, S, R, G
300 C
2
B
Engine
CDI 2.1 l, 2.2 l, 3.0 V6
3.0 V6
3
C
EN I
Injectors
Delphi
Bosch
4
5