Garden Treasures 850SDF Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
4. Place tenons of chair back (A) into mortises on
right rocker side (E). Tap the top tenon on chair
back (A) and then the bottom tenon, alternating
until attached.
Note: Use a rubber mallet to secure parts in
place.
Note: A slight rocking motion may help get the
tenons in the mortises.
5. Insert front spindles (D) into pre-drilled holes on
the front of right rocker side (E).
Note: Use a rubber mallet to secure parts in
place.
Note: It does not matter which side of front
spindle (D) is inserted into the hole.
IMPORTANT: Before continuing to the next
step, please review the assembly thus far to
make sure all tenons of the various parts are
fully seated.
6. Place left rocker side (F) on top of the assembly.
Starting with back spindle (C), align the tenons
with the pre-drilled hole on left rocker side (F)
and insert fully. Do the same for front spindles (D),
chair seat (B) and chair back (A); it may take
a few times for all tenons to seat fully in the
mortises.
Note: Use a rubber mallet to secure parts in
place.
Note: Two people are recommended for this step.
4
5
6
C
F
Lowes.com/gardentreasures
5
A
E
D
E